00001 /* deflate.h -- internal compression state
00002 * Copyright (C) 1995-1998 Jean-loup Gailly
00003 * For conditions of distribution and use, see copyright notice in zlib.h
00004 */
00005
00006 /* WARNING: this file should *not* be used by applications. It is
00007 part of the implementation of the compression library and is
00008 subject to change. Applications should only use zlib.h.
00009 */
00010
00011 /* @(#) $Id: deflate_8h-source.html,v 1.3 2002/06/20 20:23:08 mgruner Exp $ */
00012
00013 #ifndef _DEFLATE_H
00014 #define _DEFLATE_H
00015
00016 #include "zutil.h"
00017
00018 /* ===========================================================================
00019 * Internal compression state.
00020 */
00021
00022 #define LENGTH_CODES 29
00023 /* number of length codes, not counting the special END_BLOCK code */
00024
00025 #define LITERALS 256
00026 /* number of literal bytes 0..255 */
00027
00028 #define L_CODES (LITERALS+1+LENGTH_CODES)
00029 /* number of Literal or Length codes, including the END_BLOCK code */
00030
00031 #define D_CODES 30
00032 /* number of distance codes */
00033
00034 #define BL_CODES 19
00035 /* number of codes used to transfer the bit lengths */
00036
00037 #define HEAP_SIZE (2*L_CODES+1)
00038 /* maximum heap size */
00039
00040 #define MAX_BITS 15
00041 /* All codes must not exceed MAX_BITS bits */
00042
00043 #define INIT_STATE 42
00044 #define BUSY_STATE 113
00045 #define FINISH_STATE 666
00046 /* Stream status */
00047
00048
00049 /* Data structure describing a single value and its code string. */
00050 typedef struct ct_data_s {
00051 union {
00052 ush freq; /* frequency count */
00053 ush code; /* bit string */
00054 } fc;
00055 union {
00056 ush dad; /* father node in Huffman tree */
00057 ush len; /* length of bit string */
00058 } dl;
00059 } FAR ct_data;
00060
00061 #define Freq fc.freq
00062 #define Code fc.code
00063 #define Dad dl.dad
00064 #define Len dl.len
00065
00066 typedef struct static_tree_desc_s static_tree_desc;
00067
00068 typedef struct tree_desc_s {
00069 ct_data *dyn_tree; /* the dynamic tree */
00070 int max_code; /* largest code with non zero frequency */
00071 static_tree_desc *stat_desc; /* the corresponding static tree */
00072 } FAR tree_desc;
00073
00074 typedef ush Pos;
00075 typedef Pos FAR Posf;
00076 typedef unsigned IPos;
00077
00078 /* A Pos is an index in the character window. We use short instead of int to
00079 * save space in the various tables. IPos is used only for parameter passing.
00080 */
00081
00082 typedef struct internal_state {
00083 z_streamp strm; /* pointer back to this zlib stream */
00084 int status; /* as the name implies */
00085 Bytef *pending_buf; /* output still pending */
00086 ulg pending_buf_size; /* size of pending_buf */
00087 Bytef *pending_out; /* next pending byte to output to the stream */
00088 int pending; /* nb of bytes in the pending buffer */
00089 int noheader; /* suppress zlib header and adler32 */
00090 Byte data_type; /* UNKNOWN, BINARY or ASCII */
00091 Byte method; /* STORED (for zip only) or DEFLATED */
00092 int last_flush; /* value of flush param for previous deflate call */
00093
00094 /* used by deflate.c: */
00095
00096 uInt w_size; /* LZ77 window size (32K by default) */
00097 uInt w_bits; /* log2(w_size) (8..16) */
00098 uInt w_mask; /* w_size - 1 */
00099
00100 Bytef *window;
00101 /* Sliding window. Input bytes are read into the second half of the window,
00102 * and move to the first half later to keep a dictionary of at least wSize
00103 * bytes. With this organization, matches are limited to a distance of
00104 * wSize-MAX_MATCH bytes, but this ensures that IO is always
00105 * performed with a length multiple of the block size. Also, it limits
00106 * the window size to 64K, which is quite useful on MSDOS.
00107 * To do: use the user input buffer as sliding window.
00108 */
00109
00110 ulg window_size;
00111 /* Actual size of window: 2*wSize, except when the user input buffer
00112 * is directly used as sliding window.
00113 */
00114
00115 Posf *prev;
00116 /* Link to older string with same hash index. To limit the size of this
00117 * array to 64K, this link is maintained only for the last 32K strings.
00118 * An index in this array is thus a window index modulo 32K.
00119 */
00120
00121 Posf *head; /* Heads of the hash chains or NIL. */
00122
00123 uInt ins_h; /* hash index of string to be inserted */
00124 uInt hash_size; /* number of elements in hash table */
00125 uInt hash_bits; /* log2(hash_size) */
00126 uInt hash_mask; /* hash_size-1 */
00127
00128 uInt hash_shift;
00129 /* Number of bits by which ins_h must be shifted at each input
00130 * step. It must be such that after MIN_MATCH steps, the oldest
00131 * byte no longer takes part in the hash key, that is:
00132 * hash_shift * MIN_MATCH >= hash_bits
00133 */
00134
00135 long block_start;
00136 /* Window position at the beginning of the current output block. Gets
00137 * negative when the window is moved backwards.
00138 */
00139
00140 uInt match_length; /* length of best match */
00141 IPos prev_match; /* previous match */
00142 int match_available; /* set if previous match exists */
00143 uInt strstart; /* start of string to insert */
00144 uInt match_start; /* start of matching string */
00145 uInt lookahead; /* number of valid bytes ahead in window */
00146
00147 uInt prev_length;
00148 /* Length of the best match at previous step. Matches not greater than this
00149 * are discarded. This is used in the lazy match evaluation.
00150 */
00151
00152 uInt max_chain_length;
00153 /* To speed up deflation, hash chains are never searched beyond this
00154 * length. A higher limit improves compression ratio but degrades the
00155 * speed.
00156 */
00157
00158 uInt max_lazy_match;
00159 /* Attempt to find a better match only when the current match is strictly
00160 * smaller than this value. This mechanism is used only for compression
00161 * levels >= 4.
00162 */
00163 # define max_insert_length max_lazy_match
00164 /* Insert new strings in the hash table only if the match length is not
00165 * greater than this length. This saves time but degrades compression.
00166 * max_insert_length is used only for compression levels <= 3.
00167 */
00168
00169 int level; /* compression level (1..9) */
00170 int strategy; /* favor or force Huffman coding*/
00171
00172 uInt good_match;
00173 /* Use a faster search when the previous match is longer than this */
00174
00175 int nice_match; /* Stop searching when current match exceeds this */
00176
00177 /* used by trees.c: */
00178 /* Didn't use ct_data typedef below to supress compiler warning */
00179 struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
00180 struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
00181 struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
00182
00183 struct tree_desc_s l_desc; /* desc. for literal tree */
00184 struct tree_desc_s d_desc; /* desc. for distance tree */
00185 struct tree_desc_s bl_desc; /* desc. for bit length tree */
00186
00187 ush bl_count[MAX_BITS+1];
00188 /* number of codes at each bit length for an optimal tree */
00189
00190 int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
00191 int heap_len; /* number of elements in the heap */
00192 int heap_max; /* element of largest frequency */
00193 /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
00194 * The same heap array is used to build all trees.
00195 */
00196
00197 uch depth[2*L_CODES+1];
00198 /* Depth of each subtree used as tie breaker for trees of equal frequency
00199 */
00200
00201 uchf *l_buf; /* buffer for literals or lengths */
00202
00203 uInt lit_bufsize;
00204 /* Size of match buffer for literals/lengths. There are 4 reasons for
00205 * limiting lit_bufsize to 64K:
00206 * - frequencies can be kept in 16 bit counters
00207 * - if compression is not successful for the first block, all input
00208 * data is still in the window so we can still emit a stored block even
00209 * when input comes from standard input. (This can also be done for
00210 * all blocks if lit_bufsize is not greater than 32K.)
00211 * - if compression is not successful for a file smaller than 64K, we can
00212 * even emit a stored file instead of a stored block (saving 5 bytes).
00213 * This is applicable only for zip (not gzip or zlib).
00214 * - creating new Huffman trees less frequently may not provide fast
00215 * adaptation to changes in the input data statistics. (Take for
00216 * example a binary file with poorly compressible code followed by
00217 * a highly compressible string table.) Smaller buffer sizes give
00218 * fast adaptation but have of course the overhead of transmitting
00219 * trees more frequently.
00220 * - I can't count above 4
00221 */
00222
00223 uInt last_lit; /* running index in l_buf */
00224
00225 ushf *d_buf;
00226 /* Buffer for distances. To simplify the code, d_buf and l_buf have
00227 * the same number of elements. To use different lengths, an extra flag
00228 * array would be necessary.
00229 */
00230
00231 ulg opt_len; /* bit length of current block with optimal trees */
00232 ulg static_len; /* bit length of current block with static trees */
00233 uInt matches; /* number of string matches in current block */
00234 int last_eob_len; /* bit length of EOB code for last block */
00235
00236 #ifdef DEBUG
00237 ulg compressed_len; /* total bit length of compressed file mod 2^32 */
00238 ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
00239 #endif
00240
00241 ush bi_buf;
00242 /* Output buffer. bits are inserted starting at the bottom (least
00243 * significant bits).
00244 */
00245 int bi_valid;
00246 /* Number of valid bits in bi_buf. All bits above the last valid bit
00247 * are always zero.
00248 */
00249
00250 } FAR deflate_state;
00251
00252 /* Output a byte on the stream.
00253 * IN assertion: there is enough room in pending_buf.
00254 */
00255 #define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
00256
00257
00258 #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
00259 /* Minimum amount of lookahead, except at the end of the input file.
00260 * See deflate.c for comments about the MIN_MATCH+1.
00261 */
00262
00263 #define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
00264 /* In order to simplify the code, particularly on 16 bit machines, match
00265 * distances are limited to MAX_DIST instead of WSIZE.
00266 */
00267
00268 /* in trees.c */
00269 void _tr_init OF((deflate_state *s));
00270 int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
00271 void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
00272 int eof));
00273 void _tr_align OF((deflate_state *s));
00274 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
00275 int eof));
00276
00277 #define d_code(dist) \
00278 ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
00279 /* Mapping from a distance to a distance code. dist is the distance - 1 and
00280 * must not have side effects. _dist_code[256] and _dist_code[257] are never
00281 * used.
00282 */
00283
00284 #ifndef DEBUG
00285 /* Inline versions of _tr_tally for speed: */
00286
00287 #if defined(GEN_TREES_H) || !defined(STDC)
00288 extern uch _length_code[];
00289 extern uch _dist_code[];
00290 #else
00291 extern const uch _length_code[];
00292 extern const uch _dist_code[];
00293 #endif
00294
00295 # define _tr_tally_lit(s, c, flush) \
00296 { uch cc = (c); \
00297 s->d_buf[s->last_lit] = 0; \
00298 s->l_buf[s->last_lit++] = cc; \
00299 s->dyn_ltree[cc].Freq++; \
00300 flush = (s->last_lit == s->lit_bufsize-1); \
00301 }
00302 # define _tr_tally_dist(s, distance, length, flush) \
00303 { uch len = (length); \
00304 ush dist = (distance); \
00305 s->d_buf[s->last_lit] = dist; \
00306 s->l_buf[s->last_lit++] = len; \
00307 dist--; \
00308 s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
00309 s->dyn_dtree[d_code(dist)].Freq++; \
00310 flush = (s->last_lit == s->lit_bufsize-1); \
00311 }
00312 #else
00313 # define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
00314 # define _tr_tally_dist(s, distance, length, flush) \
00315 flush = _tr_tally(s, distance, length)
00316 #endif
00317
00318 #endif
1.2.15